Plate flanges are one of the most widely used connection components in piping systems, especially in waterworks, industrial processing, and utility applications. They are fabricated by cutting profiles from flat carbon or stainless steel ASTM specified plate. Subsequently, they are
If you work on water or wastewater projects, you’ve likely encountered AIS (American Iron and Steel) and BABA (Build America, Buy America). They are closely related but don’t operate the same way in practice. AIS established the baseline by requiring
The Deutsches Institut für Normung (DIN) is a leading standards organization that aligns with European and international frameworks to ensure industrial safety and quality. DIN establishes essential requirements for metric piping, specifically regarding flange materials, pressure ratings, and temperature tolerances.
Plate flanges are flanges manufactured from flat-rolled steel plate stock rather than being shaped from heated metal billets through a forging process. They are cut, machined, and drilled from plate stock for use in a wide range of piping systems.
A “plate flange” describes how a flange is manufactured (cut from plate/flat stock), not a universal dimensional standard. The actual dimensions, bolt-hole patterns, facing details, and pressure/temperature rules come from the standard you specify, such as ANSI/ASME B16.5, AWWA C207,
If you have worked around flanges long enough, you have seen it. Two different suppliers, two flanges made to the same specification, with the same dimensions, tolerances, material, and standard, and still do not look equal when they arrive. One
Plate flanges are fabricated by cutting profiles from flat carbon or stainless steel ASTM specified plate. Subsequently, they are machined to precise specifications, including bolt hole patterns and center bores. While forged flanges are shaped under high pressure or force
We start the process by receiving raw material.When material arrives, it first goes through receiving inspection. Our receiving inspector performs an initial check per the work order, measuring two points on the material to verify callout dimensions. This confirms that
The real issue behind most mismatches Most flange mismatches happen because people assume all flanges are the same. In reality, flanges from different manufacturers can vary in size, pressure rating, material, and bolt hole pattern.To avoid these problems, always double-check
To design a safe and reliable piping system, it is critical to select the appropriate ASME/ANSI flange. Properly chosen flanges must be able to accommodate operating pressure, temperature, mechanical loading, and environmental exposure. On the other hand, if a flange
Our Press Release articles are here to provide you useful information about the latest news and company updates from API International, Inc.
Our Technical Resources are here to provide you useful information including Spec Sheets, Product Catalog, Line Cards, and more.
